ETC EngineeringMCQs
Home › Exam MCQs › JTO

JTO MCQs

Practice JTO-oriented Electronics & Telecommunication Engineering MCQs with answers and explanations for technical exam preparation. Questions are arranged in pages of up to 100.

Question 301
Network TheoryNodal Analysis

In nodal analysis, the principal unknown quantities are usually?

  • ABranch powers
  • BNode voltages with respect to a reference node
  • CLoop charges
  • DOnly source currents
Report an error
Correct Answer: B. Node voltages with respect to a reference node
Explanation: Nodal analysis applies KCL to determine node voltages relative to a chosen reference or ground node.
Reference: Standard network theory: nodal analysis
Question 303
Network TheoryAC Circuit Analysis

Admittance is defined as?

  • AThe reciprocal of impedance
  • BThe square of impedance
  • CResistance plus reactance only
  • DVoltage divided by power
Report an error
Correct Answer: A. The reciprocal of impedance
Explanation: Admittance Y = 1/Z and is measured in siemens.
Reference: Standard network theory: ac circuit analysis
Question 305
Network TheoryAC Circuit Analysis

The reciprocal of resistance is called?

  • AReactance
  • BConductance
  • CSusceptance
  • DInductance
Report an error
Correct Answer: B. Conductance
Explanation: Conductance G = 1/R and is measured in siemens.
Reference: Standard network theory: ac circuit analysis
Question 306
Network TheoryMesh Analysis

In mesh analysis, the principal unknown quantities are usually?

  • ANode voltages
  • BMesh currents
  • CCapacitances only
  • DSource powers only
Report an error
Correct Answer: B. Mesh currents
Explanation: Mesh analysis assigns a current to each independent mesh and uses KVL equations to solve for those currents.
Reference: Standard network theory: mesh analysis
Question 307
Network TheoryAC Circuit Analysis

In a purely inductive AC circuit, current ideally?

  • ALeads voltage by 90 degrees
  • BLags voltage by 90 degrees
  • CIs in phase with voltage
  • DLags voltage by 180 degrees
Report an error
Correct Answer: B. Lags voltage by 90 degrees
Explanation: For an ideal inductor, voltage leads current by 90 degrees; equivalently, current lags voltage by 90 degrees.
Reference: Standard network theory: ac circuit analysis
Question 308
Network TheoryMesh Analysis

Two adjacent meshes have currents I1 and I2 flowing through a common resistor R in opposite directions. The voltage drop associated with mesh I1 across the common resistor is?

  • AR(I1+I2)
  • BR(I1-I2)
  • CR/I1
  • DR(I2-I1) only regardless of reference
Report an error
Correct Answer: B. R(I1-I2)
Explanation: With the mesh currents opposing each other in the shared branch, the branch current referenced in I1's direction is I1-I2, so the drop is R(I1-I2).
Reference: Standard network theory: mesh analysis
Question 309
Network TheoryAC Circuit Analysis

In a purely capacitive AC circuit, current ideally?

  • ALags voltage by 90 degrees
  • BLeads voltage by 90 degrees
  • CIs in phase with voltage
  • DLeads voltage by 180 degrees
Report an error
Correct Answer: B. Leads voltage by 90 degrees
Explanation: For an ideal capacitor, current leads voltage by 90 degrees.
Reference: Standard network theory: ac circuit analysis
Question 310
Network TheorySource Transformation

A 12 V ideal voltage source in series with a 3 ohm resistor is source-transformed into?

  • AA 4 A current source in parallel with 3 ohm
  • BA 36 A current source in parallel with 3 ohm
  • CA 4 A current source in series with 3 ohm
  • DA 3 A current source in parallel with 4 ohm
Report an error
Correct Answer: A. A 4 A current source in parallel with 3 ohm
Explanation: The equivalent current is I = V/R = 12/3 = 4 A, and the same 3 ohm resistance is placed in parallel.
Reference: Standard network theory: source transformation
Question 312
Network TheorySource Transformation

A 5 A ideal current source in parallel with a 2 ohm resistor is equivalent to?

  • AA 2.5 V source in series with 2 ohm
  • BA 7 V source in series with 2 ohm
  • CA 10 V source in series with 2 ohm
  • DA 10 V source in parallel with 2 ohm
Report an error
Correct Answer: C. A 10 V source in series with 2 ohm
Explanation: The equivalent voltage is V = IR = 5×2 = 10 V, with the 2 ohm resistance in series.
Reference: Standard network theory: source transformation
Question 318
Network TheoryNetwork Theorems

When finding Thevenin resistance in a circuit containing dependent sources, dependent sources should generally be?

  • ATurned off like independent sources
  • BKept active
  • CAlways replaced by open circuits
  • DAlways replaced by short circuits
Report an error
Correct Answer: B. Kept active
Explanation: Dependent sources remain active because their values depend on circuit variables. A test source can be applied at the terminals to determine equivalent resistance.
Reference: Standard network theory: network theorems
Advertisement / responsive in-content slot
Question 326
Network TheoryLaplace Transform

The Laplace transform of a unit step u(t) is?

  • A1
  • B1/s
  • Cs
  • D1/s^2
Report an error
Correct Answer: B. 1/s
Explanation: The unilateral or ordinary Laplace transform of the unit step for t>=0 is 1/s.
Reference: Standard network theory: laplace transform
Question 327
Network TheoryLaplace Transform

The Laplace transform of e^(-at)u(t) is?

  • A1/(s-a)
  • B1/(s+a)
  • Cs/(s+a)
  • Da/(s+a)
Report an error
Correct Answer: B. 1/(s+a)
Explanation: L{e^(-at)} = 1/(s+a), for the appropriate region of convergence.
Reference: Standard network theory: laplace transform
Question 328
Network TheoryLaplace Transform

The Laplace transform of sin(omega t)u(t) is?

  • As/(s^2+omega^2)
  • Bomega/(s^2+omega^2)
  • C1/(s+omega)
  • Domega/s^2
Report an error
Correct Answer: B. omega/(s^2+omega^2)
Explanation: The standard transform is L{sin(omega t)}=omega/(s^2+omega^2).
Reference: Standard network theory: laplace transform
Question 329
Network TheoryNetwork Functions

For a network with zero initial conditions, its transfer function H(s) is generally defined as?

  • AInput divided by output
  • BOutput transform divided by input transform
  • COutput plus input
  • DOnly the denominator polynomial
Report an error
Correct Answer: B. Output transform divided by input transform
Explanation: With zero initial conditions, H(s)=Y(s)/X(s), the ratio of output transform to input transform.
Reference: Standard network theory: network functions
Question 330
Network TheoryNetwork Functions

The poles of a network transfer function are the values of s that make its?

  • ANumerator zero
  • BDenominator zero
  • CInput resistance zero only
  • DOutput voltage always one
Report an error
Correct Answer: B. Denominator zero
Explanation: Poles are roots of the denominator polynomial of the transfer function after common factors have been removed.
Reference: Standard network theory: network functions
Question 331
Network TheoryNetwork Functions

The zeros of a transfer function are the values of s that make its?

  • ANumerator zero
  • BDenominator zero
  • CTime constant infinite only
  • DSupply voltage zero
Report an error
Correct Answer: A. Numerator zero
Explanation: Zeros are roots of the numerator polynomial after common factors have been removed.
Reference: Standard network theory: network functions
Question 332
Network TheoryNetwork Functions

For a stable continuous-time LTI network with a rational transfer function, all poles must lie where in the s-plane for asymptotic stability?

  • AStrictly in the left half-plane
  • BStrictly in the right half-plane
  • COnly on the positive real axis
  • DAnywhere with positive real part
Report an error
Correct Answer: A. Strictly in the left half-plane
Explanation: For a causal rational continuous-time system to be asymptotically stable, its poles must have negative real parts, i.e. lie strictly in the left half-plane.
Reference: Standard network theory: network functions
Question 339
Network TheorySecond-Order Circuits

A series RLC natural response is underdamped when?

  • Aalpha is less than omega0
  • Balpha equals omega0
  • Calpha is greater than omega0
  • DR is always zero only
Report an error
Correct Answer: A. alpha is less than omega0
Explanation: The second-order response is underdamped when alphaomega0.
Reference: Standard network theory: second-order circuits
Question 341
Network TheorySecond-Order Circuits

Critical damping in a second-order series RLC circuit occurs when?

  • Aalpha=0
  • Balpha=omega0
  • Calpha=2omega0
  • Domega0=0
Report an error
Correct Answer: B. alpha=omega0
Explanation: Critical damping occurs at the boundary between oscillatory and nonoscillatory responses, where alpha equals omega0.
Reference: Standard network theory: second-order circuits
Question 344
Network TheoryTransient Analysis

A first-order circuit is generally considered very close to its final steady-state value after approximately?

  • AOne time constant
  • BTwo time constants
  • CFive time constants
  • DTen milliseconds in every circuit
Report an error
Correct Answer: C. Five time constants
Explanation: After five time constants, a first-order response has completed more than 99% of its total transition and is commonly treated as essentially settled.
Reference: Standard network theory: transient analysis
Question 345
Network TheoryTwo-Port Networks

In ABCD or transmission parameters, which variables are commonly related for a two-port network?

  • AInput voltage/current to output voltage/current
  • BOnly the two port resistances
  • COnly input powers
  • DOnly output frequencies
Report an error
Correct Answer: A. Input voltage/current to output voltage/current
Explanation: ABCD parameters are particularly useful for cascaded networks because they relate input port variables to output port variables.
Reference: Standard network theory: two-port networks
Question 346
Network TheoryTwo-Port Networks

For cascaded two-port networks, the overall ABCD matrix is obtained by?

  • AAdding the individual ABCD matrices element by element
  • BMultiplying the individual ABCD matrices in cascade order
  • CTaking only the first matrix
  • DSubtracting all matrices
Report an error
Correct Answer: B. Multiplying the individual ABCD matrices in cascade order
Explanation: A key advantage of transmission parameters is that the ABCD matrix of a cascade is the ordered matrix product of the individual networks.
Reference: Standard network theory: two-port networks
Question 350
Network TheoryTwo-Port Networks

The z-parameter equation for port 1 of a two-port network is?

  • AV1=z11 I1+z12 I2
  • BI1=z11 V1+z12 V2
  • CV1=z11 V1+z12 V2
  • DI1=z11 I1+z12 I2
Report an error
Correct Answer: A. V1=z11 I1+z12 I2
Explanation: By definition of impedance parameters, V1=z11I1+z12I2 and V2=z21I1+z22I2.
Reference: Standard network theory: two-port networks
Advertisement / responsive in-content slot
Question 353
Network TheoryLaplace Transform

The inverse Laplace transform of 1/(s+4) is?

  • Ae^(-4t)u(t)
  • Be^(4t)u(t)
  • C4e^(-t)u(t)
  • Dsin(4t)u(t)
Report an error
Correct Answer: A. e^(-4t)u(t)
Explanation: The standard pair is 1/(s+a) ↔ e^(-at)u(t).
Reference: Standard network theory: laplace transform
Question 368
Network TheoryAC Power

For a load with lagging power factor, power-factor correction is commonly achieved by connecting?

  • AA capacitor in parallel with the load
  • BAn additional resistor in series only
  • CA DC voltage source in parallel
  • DAn open circuit
Report an error
Correct Answer: A. A capacitor in parallel with the load
Explanation: A shunt capacitor supplies leading reactive power that offsets part of the load's lagging reactive power.
Reference: Standard network theory: ac power
Question 371
Network TheoryTwo-Port Networks

Two cascaded two-port networks have ABCD matrices M1 and M2. If M1 is followed by M2 from source to load, the overall transmission matrix is?

  • AM1+M2
  • BM2-M1
  • CM1M2
  • DM2/M1 element by element
Report an error
Correct Answer: C. M1M2
Explanation: For cascaded two-port networks, the overall ABCD matrix is the ordered product of the individual transmission matrices, M=M1M2 under the standard convention.
Reference: Standard network theory: two-port networks
Question 373
Network TheoryThree-Phase Circuits

The total real power in a balanced three-phase load is?

  • AVL IL cos(phi)
  • B√3 VL IL cos(phi)
  • C3 VL IL only
  • DVL IL sin(phi)
Report an error
Correct Answer: B. √3 VL IL cos(phi)
Explanation: Balanced three-phase real power is P=√3 VL IL cos(phi).
Reference: Standard network theory: three-phase circuits
Advertisement / responsive in-content slot
Question 376
Communication SystemsCommunication Fundamentals

The primary purpose of modulation in a communication system is to?

  • ATranslate a baseband signal to a suitable carrier frequency
  • BEliminate all noise completely
  • CMake information independent of bandwidth
  • DConvert every signal to DC
Report an error
Correct Answer: A. Translate a baseband signal to a suitable carrier frequency
Explanation: Modulation shifts information onto a carrier, enabling practical transmission, frequency allocation and efficient antennas.
Reference: Standard communication systems: communication fundamentals
Question 377
Communication SystemsCommunication Fundamentals

A basic electronic communication system normally consists of?

  • ATransmitter, channel and receiver
  • BOnly an oscillator and resistor
  • CRectifier, filter and regulator only
  • DMotor, generator and transformer
Report an error
Correct Answer: A. Transmitter, channel and receiver
Explanation: The basic communication chain contains a transmitter, a transmission medium or channel, and a receiver.
Reference: Standard communication systems: communication fundamentals
Question 378
Communication SystemsCommunication Fundamentals

The information signal before modulation is commonly called the?

  • ACarrier signal
  • BBaseband or message signal
  • CLocal oscillator signal
  • DIntermediate-frequency signal only
Report an error
Correct Answer: B. Baseband or message signal
Explanation: The original information-bearing signal is called the message or baseband signal.
Reference: Standard communication systems: communication fundamentals
Question 380
Communication SystemsAmplitude Modulation

In conventional amplitude modulation, which carrier parameter is varied according to the message signal?

  • AAmplitude
  • BFrequency
  • CPhase only
  • DPropagation velocity
Report an error
Correct Answer: A. Amplitude
Explanation: In AM, the carrier amplitude varies in accordance with the instantaneous message signal while carrier frequency and phase remain nominally constant.
Reference: Standard communication systems: amplitude modulation
Question 382
Communication SystemsAmplitude Modulation

For a single-tone AM wave, modulation index m is commonly equal to?

  • AMessage amplitude divided by carrier amplitude
  • BCarrier amplitude divided by message amplitude
  • CCarrier frequency divided by message frequency
  • DMessage frequency multiplied by carrier frequency
Report an error
Correct Answer: A. Message amplitude divided by carrier amplitude
Explanation: For standard sinusoidal AM, m=Am/Ac when the modulating and carrier amplitudes are expressed consistently.
Reference: Standard communication systems: amplitude modulation
Question 387
Communication SystemsFrequency Modulation

A major advantage of FM over conventional AM in many analog radio applications is better?

  • ANoise immunity
  • BDC power conversion
  • CCarrier suppression
  • DAntenna elimination
Report an error
Correct Answer: A. Noise immunity
Explanation: Because information is carried in frequency rather than amplitude, FM can provide improved rejection of amplitude noise and better noise performance under suitable conditions.
Reference: Standard communication systems: frequency modulation
Question 389
Communication SystemsFrequency Modulation

Pre-emphasis and de-emphasis in FM systems are used primarily to improve?

  • AHigh-frequency noise performance
  • BDC supply regulation
  • CAntenna mechanical strength
  • DCarrier power efficiency to 100%
Report an error
Correct Answer: A. High-frequency noise performance
Explanation: Pre-emphasis boosts higher message frequencies before transmission and de-emphasis restores the response at the receiver while reducing high-frequency noise.
Reference: Standard communication systems: frequency modulation
Question 392
Communication SystemsAmplitude Modulation

In conventional AM, the carrier component itself contains?

  • AAll of the message information
  • BNo message information by itself
  • COnly the highest audio frequency
  • DOnly digital data
Report an error
Correct Answer: B. No message information by itself
Explanation: The unmodulated carrier does not itself contain the message; the information resides in the sidebands.
Reference: Standard communication systems: amplitude modulation
Question 394
Communication SystemsDSB-SC & SSB

In a DSB-SC system, which component is suppressed?

  • ABoth sidebands
  • BCarrier
  • CMessage signal
  • DReceiver local oscillator
Report an error
Correct Answer: B. Carrier
Explanation: Double-sideband suppressed-carrier modulation transmits both sidebands while suppressing the carrier component.
Reference: Standard communication systems: dsb-sc & ssb
Question 397
Communication SystemsDSB-SC & SSB

One important advantage of SSB over conventional AM is?

  • ATwice the bandwidth requirement
  • BReduced bandwidth and improved power efficiency
  • CNeed for a much larger carrier
  • DComplete immunity to all noise
Report an error
Correct Answer: B. Reduced bandwidth and improved power efficiency
Explanation: SSB transmits one sideband and usually suppresses the carrier, saving both bandwidth and transmitted power.
Reference: Standard communication systems: dsb-sc & ssb
Question 398
Communication SystemsAM Demodulation

An envelope detector is most directly suitable for demodulating?

  • AProperly modulated conventional AM with carrier
  • BDSB-SC with no carrier under all conditions
  • CSSB-SC without carrier
  • DBPSK only
Report an error
Correct Answer: A. Properly modulated conventional AM with carrier
Explanation: A simple envelope detector can recover the message from conventional AM when a sufficiently strong carrier is present and overmodulation is avoided.
Reference: Standard communication systems: am demodulation
Question 399
Communication SystemsDemodulation

Coherent detection requires the receiver to have?

  • AA locally generated carrier with correct frequency and phase reference
  • BNo oscillator
  • COnly a diode and capacitor
  • DAn infinite bandwidth antenna
Report an error
Correct Answer: A. A locally generated carrier with correct frequency and phase reference
Explanation: Synchronous or coherent detection multiplies the received signal by a locally generated carrier synchronized in frequency and phase.
Reference: Standard communication systems: demodulation
Advertisement / responsive in-content slot